Install VA - Hyper-V

From Tranzman Documentation
Revision as of 11:39, 4 January 2019 by Admin (talk | contribs)
Jump to: navigation, search

This is the installation guide for creating your own Tranzman Virtual Appliance under Microsoft Hyper-V.

Step 1

Launch Hyper-V manager and "Create a New Virtual Machine". Give the machine a unique name that will make it easy to identify, i.e. Tranzman - VA

File:Example.jpg

Step 2

Select Generation 1 machine.

File:Example.jpg

Step 3

Select 2GB of RAM size. If you use Dynamic Memory, make sure that the Maximum RAM is set to this size.

Step 4

For the NIC settings, select an External Virtual Switch.

File:Example.jpg

Step 5

Assign two virtual hard disks as specified below.

  • 1 x 3GB HDD for OS Installation
  • 1 x 20GB HDD for Data

You will need to edit the machine later to add the second 20GB Hard Drive.

Step 6

At this stage, point it to the correct ISO image, or leave it out to install the operating system at a later date.

File:Example.jpg


Step 7

Press Finish at the end of the process to start the creation of the VA, and proceed to install the OS once the process completes.



Use this link to go back to the main Installation Page.