Install VA - Hyper-V

This is the installation guide for creating your own Tranzman Virtual Appliance under Microsoft Hyper-V.

Step 1

Launch Hyper-V manager and "Create a New Virtual Machine". Give the machine a unique name that will make it easy to identify, i.e. Tranzman - VA

Step 2

Select Generation 1 machine.

Step 3

Select 2GB of RAM size. If you use Dynamic Memory, make sure that the Maximum RAM is set to this size.

Step 4

For the NIC settings, select an External Virtual Switch.

Step 5

Assign two virtual hard disks as specified below.

• 1 x 3GB HDD for OS Installation
• 1 x 20GB HDD for Data

You will need to edit the machine later to add the second 20GB Hard Drive.

Step 6

At this stage, point it to the correct ISO image, or leave it out to install the operating system at a later date.

Step 7

Press Finish at the end of the process to start the creation of the VA, and proceed to install the OS once the process completes.

---

Use this link to go back to the main Installation Page.