Install TZM Server

From Tranzman Documentation
Revision as of 16:23, 5 September 2018 by Admin (talk | contribs)
Jump to: navigation, search

This section explains how to install the Tranzman Server from files provided by Stone Ram Ltd.

Step 1

Power on your virtual/physical machine with the ISO file inserted for booting. On the first page, the EULA agreement has to be accepted before proceeding.

Use the "Page Down" key to cycle through the document. Press Q on the keyboard, followed by Y to accept the terms.

Step 2

The installer will scan the system for available hard drives. Tranzman Server needs to be installed to the device "sda".

Step 3

Supported Systems for Installation are:

  • Microsoft Windows 2003 (or higher)
  • AIX 6.1 (or higher)
  • SunOS 10 Sparc (or higher)
  • HP-UX 11.X (or higher)
  • Linux Kernel 2.6 (or higher)

Software Requirements

  • On Linux/Unix systems root access is needed.
  • On Windows systems local system is needed.
  • On the internal network open port 5555 on the firewalls.

Creating Shares

The Tranzman application requires access to a share on the source machine for migration purposes. This share can be in the form of NFS/Samba Volumes under Linux/Unix. Only read only rights are required on this share.

Under Windows an SMB share would also need to be created. This can easily be done from Command Prompt,

C:\WINDOWS\system32\net share <sharename=drive:path>

Retrieved from "https://docs.stoneram.com/index.php?title=Install_TZM_Server&oldid=163"