Devices

From Tranzman Documentation
Revision as of 10:55, 28 July 2020 by Sachin (talk | contribs)
Jump to: navigation, search

Tranzman further categorise Devices in to three types .All of them have different objectives as explained below :-


1.Tape Library ->

2.Disk Library ->

3.NAS Connectors -> Used for mounting NFS/CFS shares on to appliance for Data Recovery to files.


Follow below steps to add Devices(robots and drives) to the Tranzman Appliance.

Step 1.1

Go to System on the sidebar and click on Devices.The page should look something like as shown below with three categories.


DevicesPage.JPG


Step 1.2

By default you should be in Tape Library section and if your library has been properly added(zoned) to the Tranzman Appliance , the Libraries and Devices sections must be populated i.e. you should see the robot and the drives entry as shown in the below picture.


TapeLibraryAdded.JPG


Step 1.3

On the top right corner of the same page click InventoryButton.JPG to run an inventory and ContentsButton.JPG to view the contents of the library (i.e. DRIVE,TAPES).



ContentsOfLibrary.JPG


Follow below step to add Disk Library to the Tranzman Appliance which could be either NFS or SMB share.

Click on the Disk Library section and hit the PlusButton.JPG and add the relevant information of the share alloted.


DiskLibraryPage.JPG


Follow below step to add Disk Library to the Tranzman Appliance which could be either NFS or SMB share.

Click on the NAS Connectors sections and hit the PlusButton.JPG and add the relevant information of the share alloted.


NASConnectors.JPG


Jump to Check Transition Readiness

Return to Select Migration Components