Devices
Tranzman further categorise Devices in to three types :-
1.Tape Library ->
2.Disk Library ->
3.NAS Connectors -> Used for mounting NFS/CFS shares on to appliance for Data Recovery to files.
All of the above have different objectives.Tape Library category is used to add library and drives for operations like
Follow below steps to add Devices(robots and drives) to the Tranzman Appliance.
Step 1
Go to System on the sidebar and click on Devices.The page should look something like as shown below with three categories.
Step 2
By default you should be in Tape Library section and if your library has been properly added(zoned) to the Tranzman Appliance , the Libraries and Devices sections must be populated i.e. you should see the robot and the drives entry as shown in the below picture.
Step 3
On the top right corner of the same page click 
to run an inventory and 
to view the contents of the library (i.e. DRIVE,TAPES).
