Scsi inq
From Tranzman Documentation
Use this option to scan and display all devices on the SCSI bus including local hard drives.
|
> scsi_inq |
On a system with no attached drives, this will produce an output similar to this.
|
[0:0:0:0] disk VMware Virtual disk 1.0 /dev/sda /dev/sg0 [0:0:1:0] disk VMware Virtual disk 1.0 /dev/sdb /dev/sg1 [0:0:2:0] disk VMware Virtual disk 1.0 /dev/sdc /dev/sg2 [0:0:3:0] disk VMware Virtual disk 1.0 /dev/sdd /dev/sg3 [0:0:4:0] disk VMware Virtual disk 1.0 /dev/sde /dev/sg4 [0:0:5:0] disk VMware Virtual disk 1.0 /dev/sdf /dev/sg5 [2:0:0:0] cd/dvd NECVMWar VMware IDE CDR10 1.00 /dev/sr0 /dev/sg6 |