Map Drives

This section walks the user through the options for dealing with Map Drives.

To bring up the menu, use the command below; |} Menu displayed would look like this.

add_drive Add drive to map delete_drive Delete drive from map delete_map Delete map exit Exit this CLI session help Display an overview of the CLI syntax list_robot_drives show drives configured in the library list_robots List all connected robots return return to previous menu show_all_maps List all current maps show_map List map contents for a specific library

Add Drive

To add a drive to the appliance, make sure that all the cables are connected properly and then power up the device.

> map_drives <serial> <drive> <dserial>

• <serial> Robot Serial Number
• <drive> Drive Number
• <dserial> Drive Serial Number

Exact values will nee to be provided for this command to work. If unsure invoke the rescan command.

Delete Drive

To delete the drive, run the command;

> delete_drive <serial> <drive>

• <serial> Robot Serial Number
• <drive> Drive Number

Delete Map

To delete the robot only but to leave the tape drive untouched.

> delete_map <serial>

• <serial> Robot Serial Number

Show Map

---

Use this link to go back to the main Devices - Tape Drives Page.