Difference between revisions of "Devices"

From Tranzman Documentation
Jump to: navigation, search
Line 28: Line 28:
 
By default you should be in Tape Library section and if your library has been properly added(zoned) to the Tranzman Appliance , the Libraries and Devices sections must be populated i.e. you should see the robot
 
By default you should be in Tape Library section and if your library has been properly added(zoned) to the Tranzman Appliance , the Libraries and Devices sections must be populated i.e. you should see the robot
 
and the drives entry as shown in the below picture.
 
and the drives entry as shown in the below picture.
 +
  
  
 
[[File:TapeLibraryAdded.JPG | border|1100x800px]]
 
[[File:TapeLibraryAdded.JPG | border|1100x800px]]
 +
  
  
 
===Step 3===
 
===Step 3===

Revision as of 10:32, 28 July 2020

Tranzman further categorise Devices in to three types :-


1.Tape Library ->

2.Disk Library ->

3.NAS Connectors -> Used for mounting NFS/CFS shares on to appliance for Data Recovery to files.


All of the above have different objectives.Tape Library category is used to add library and drives for operations like


Follow below steps to add Devices(robots and drives) to the Tranzman Appliance.


Step 1

Go to System on the sidebar and click on Devices.The page should look something like as shown below with three categories.


DevicesPage.JPG


Step 2

By default you should be in Tape Library section and if your library has been properly added(zoned) to the Tranzman Appliance , the Libraries and Devices sections must be populated i.e. you should see the robot and the drives entry as shown in the below picture.


TapeLibraryAdded.JPG


Step 3