Difference between revisions of "Planning"
From Tranzman Documentation
| Line 46: | Line 46: | ||
====Backup Servers (Clients of Tranzman)==== | ====Backup Servers (Clients of Tranzman)==== | ||
| − | All servers | + | =====All servers===== |
| + | {| class="wikitable" | ||
| + | |- | ||
| + | |INBOUND || TCP 443 from ANY | ||
| + | |- | ||
| + | |} | ||
* OUTBOUND - to Tranzman Appliance TCP 55001-55555 | * OUTBOUND - to Tranzman Appliance TCP 55001-55555 | ||
Revision as of 08:43, 6 August 2020
ContentsHeadline |
To help determine the correct sizing for a Tranzman Appliance, it is recommended that the Tranzman Recorder is used to help better understand the current environment.
A single Tranzman Appliance can be used to convert many environments, the following considerations need to be taken into account when sizing it.
RAM |
- Minimum of 2GB of RAM (when If using appliance only for assessments)
- Minimum of 4GB of RAM (when migrating Same Vendor)
- Minimum of 8GB of RAM (when migrating Cross Vendor)
- Additional 1GB of RAM is required for every tape drive connected to the Appliance.
CPU |
- Minimum 2 core Intel CPU is required (for Same Vendor or Assessment).
- Minimum 4 core Intel CPU is required (for Cross Vendor).
- Additional 1 core for every tape drive connected to the Appliance.
- ONLY INTEL processors have been tested and are supported.
Network |
- 1Gbit minimum connection required (for Same Vendor migration and recovery on Demand).
- 10Gbit connection recommended for Cross Vendor to ensure that tape drive are kept running at a reasonable speed.
- If multiple links are used, aggregation is needed to provide maximum throughput.
- Multiple connections may be required if there are multiple tape drives.
Ports |
The appliance needs to communicate over the network. If you have internal firewalls, you must allow the following connections or the appliance cannot function.
Backup Servers (Clients of Tranzman)All servers
Destination servers:
Tranzman Appliance (Server)
|