Difference between revisions of "Configure Bootable TZM USB using Rufus"

From Tranzman Documentation
Jump to: navigation, search
Line 10: Line 10:
 
==='''Step 2'''===
 
==='''Step 2'''===
  
Give the machine a unique name that will make it easy to identify. i.e. Tranzman
+
Click the select button and select the TZM ISO image to use.
  
[[File:Create_VA_02.JPG]]
+
[[File: Picture_Step_2.JPG |20x|border ]]
  
 
==='''Step 3'''===
 
==='''Step 3'''===
  
Choose in which '''DataStore''' the machine and all its files will reside. In our example we are using DS1.
+
Rufus will automatically modify the settings to best match it. Click the Start button to begin the process. You'll be prompted with a warning that all data on the device will be destroyed. Click OK to proceed with the creation process.
  
[[File:Create_VA_03.JPG]]
+
[[File: Picture_Step_3.JPG |20x|border ]]
  
 
==='''Step 4'''===
 
==='''Step 4'''===
  
Select the Virtual Machine Version for the VA. Which version you require depends on your environment; your own Systems Administrator may advise you on this.  
+
Wait for the Rufus operations to complete.
  
[[File:Create_VA_04.JPG]]
+
[[File: Picture_Step_4.JPG |20x|border ]]
  
 
==='''Step 5'''===
 
==='''Step 5'''===
  
Now we select the type of the Guest Operating System. We have chosen '''CentOS 4/5/6/7 (64-bit)''' for higher compatibility.
+
Verify the files were copied over to the USB drive.
  
[[File:Create_VA_05.JPG]]
+
[[File: Picture_Step_5.JPG |20x|border ]]
  
==='''Step 6'''===
 
  
Configure the machine's CPU. The number of '''Virtual Socket''' and '''Cores per Virtual Socket''' will have been determined [[Planning|during the planning phase]].
 
 
[[File:Create_VA_06.JPG]]
 
 
==='''Step 7'''===
 
 
Configure memory.  The amount of RAM should have been determined [[Planning|during the planning phase]].
 
 
[[File:Create_VA_07.JPG]]
 
 
==='''Step 8'''===
 
 
For the network type, one adapter type of E1000 is recommended for better compatibility. Do not forget to tick the option '''"Connect at Power On"'''.
 
 
[[File:Create_VA_08.JPG]]
 
 
==='''Step 9'''===
 
 
Storage controller can be left on the default of '''"LSI Logic Parallel'''.
 
 
[[File:Create_VA_09.JPG]]
 
 
==='''Step 10'''===
 
 
Please select to use a new disk and give it a '''3GB''' size for OS installation.
 
 
[[File:Create_VA_3GB_Disk.JPG]]
 
 
==='''Step 11'''===
 
 
When '''Advanced Options''' has been reached, the default settings can be left in place for the '''Virtual Device Node'''.
 
 
==='''Step 12'''===
 
 
Before we complete the deployment of the machine, we need to tick '''"Edit the Virtual Machine Settings Before Completion"''' as extra hard drives need to be added.
 
 
==='''Step 13'''===
 
 
Add a new Hardware, select Hard Disk, and then '''"Create a new virtual disk"'''.
 
 
[[File:Create_VA_12.JPG]]
 
 
==='''Step 14'''===
 
 
Repeat the process in '''Step 13''' to add all of the required disks. Recommended values are as follows.
 
 
: '''SWAP''' = Twice the value of RAM assigned to the machine. (8GB RAM = 16GB of SWAP Partition)
 
: '''LOG''' = A minimum of 5GB is recommended
 
: '''DATA''' = A minimum of 25GB is recommended
 
: '''DATABASE''' = A minimum of 20GB is recommended
 
: '''DATASTORE''' = See [[Planning]]
 
 
If in doubt please get in contact with one of our consultants for optimal sizes depending on the size of the environment that would be migrated with Tranzman.
 
 
==='''Step 15'''===
 
 
While still under the Hardware options, add a new CD/DVD and point it to the location of the ISO file provided by Stone Ram Ltd, and ensure that the option or "Connect at power on" is enabled. In our case this has been copied to a "software" folder on the VMWare host itself.
 
 
[[File:Create_VA_Add_DVD.JPG]]
 
 
==='''Step 16'''===
 
 
Force the machine to launch the Bios Setup on first use, so that the option to boot from DVD can be changed.
 
 
[[File:Create_VA_Boot_Bios.JPG]]
 
 
==='''Step 17'''===
 
 
To finish click on '''"Power on Virtual Machine"''' and follow the next tutorial on [[Install TZM Server]].
 
 
 
----
 
 
[[Installation|Back to installation]].
 
[[Installation|Back to installation]].

Revision as of 10:26, 15 July 2020

This is the installation guide for creating your own bootable USB for TZM install on to physical servers.


Step 1

Launch Rufus with administrator privileges.

20x

Step 2

Click the select button and select the TZM ISO image to use.

20x

Step 3

Rufus will automatically modify the settings to best match it. Click the Start button to begin the process. You'll be prompted with a warning that all data on the device will be destroyed. Click OK to proceed with the creation process.

20x

Step 4

Wait for the Rufus operations to complete.

20x

Step 5

Verify the files were copied over to the USB drive.

20x


Back to installation.